Skip to content Skip to footer

SG 120 HSDS Hydraulic System Multi-Slicing Machine

hcd1m120

SG 120 HSDS  GENERAL FEATURES

Machine body is steel construction. Material hardness chewing gum and so on speed adjustment by means of hydro continuously (O) D / D up is reduced. At least 3 non-finished side edge of the miter used in a clean, direction şakülü is used. Material to be attractive and impression cylinder 6-cylinder available. Print roller takeoff and landing hydraulic piston controlled. Multi-blade shaft is fixed. Print and attractive is moving hydraulic cylinders controlled.

SG 120 HSDS TECHNICAL SPECIFICATIONS

  • Length-Width-Height : 3200 – 1500 – 1400 mm
  • Approximate Weight : 2400 KG (Average)
  • Main Motor Power : 75 KW 3000 D / D
  • Hydraulic motor power : 4 KW 1400 D / D
  • Blade Diameter: Max : 400 mm Min: 250 mm
  • Cutting thickness : 120 mm
  • Blade speed : 3000 D / D
  • Cut the Max Width : 700 mm
  • Number of Blade : Max: 10
  • Main Shaft Diameter : Ø 70 mm
  • Cutting Speed : 0 to 20 m / d
  • Cylinder Freezer Hidromotor : MR 125
  • Belt Size : 2900 SPB
  • Colors : Ocean Blue
  • Type : H.C.D.1M.120

SG 120 HSDS WORKING PRINCIPLE

SG 120 HSDS Hydraulic System Multi-Slicing Machine, max: 120 mm Height tree group of products in a single transaction, 10 saw attached to the 9 pieces of finished taking the action. Cutting with diamond circular saws are provided. Saw shaft is fixed. Max 450mm saw can be installed. Attractive rolls hydraulic motor. The top of the print rolls, hydraulic setting movement operation is performed. Machine is so full speed when used in 1 minute 20 m length, cutting process. For example, 120 mm in height, at 6000mm length, 200mm wide plank properly accepted, 0.29 m3 makes. Machine 1 hour uncut 17 m3 cutting of trees can be performed. The calculation of the dimensions may vary.

Get Offer